Laser Cleaning Device F-Clean CS-M
A mobile solution with enhanced dust and moisture protection. When closed, the case is protected according to the IP67 standard. It has handles and wheels on both sides for easy transportation.
- Form factor:
- Case medium
- Laser emission power:
- 200/300 W
- Peak power:
- 50-150 kW
- Performance:
- up to 25 cm2/s
- Laser source:
- IPG-Photonics pulsed fiber laser
- Cooling type:
- air
- Beam width:
- 10-100 mm
- Optical fiber length:
- 2-8 m
- Power supply:
- 220 V, 50 Hz
- Power consumption:
- up to 1200 W
- Case dimensions:
- 750 х 520 х 330 mm
- Case weight:
- 40 kg
- Gun weight:
- 3 kg
- Operating life:
- 100 000 hours
- Warranty period:
- 24 months
- Operating mode:
- 24/7
Laser cleaning of stainless steel from oil products
Laser cleaning of aluminum parts
Laser cleaning of car valves from carbon deposits
Laser cleaning of non-ferrous metals
Laser cleaning of marble from paint
Laser cleaning of magnesium turbine from oxide films
Laser cleaning of metal from old paint
Laser cleaning of rubber from dirt
Laser cleaning of welds from rust
Laser cleaning of threaded studs from grease and rust
Laser cleaning of welded parts from carbon deposits
Laser cleaning of complex-geometry parts from rust
Laser cleaning of wood from paint
Laser cleaning of aluminum auto-parts from oil products
Laser cleaning of copper plate from oxides and dirt
Laser cleaning of rubber from dirt
| Chemical products | Sandblasting treatment | Manual cleaning | Laser cleaning | |
| No need of consumables | ||||
| Reducing the work area | ||||
| No need of repair or tool replacements | ||||
| Reduced labor costs | ||||
| No abrasive cleaning supplies | ||||
| Cleaning of sensitive parts | ||||
| Accurate and selective cleaning | ||||
| Repetitive process | ||||
| No waste for recycling | ||||
| Low power consumption |
| Model | F-Clean CS-M 200 | F-Clean CS-M 300 |
| Form factor | Case | |
| Laser emission power | 200 W | 300 W |
| Peak power | 50 kW | 150 kW |
| Performance | up to 12 cm2/s | up to 25 cm2/s |
| Laser source | IPG-Photonics pulsed fiber laser | |
| Pulse repetition rate | 100-1000 kHz | 30-300 kHz |
| Pulse energy | 2 mJ | 10 mJ |
| Wavelength | 1064 nm | |
| Laser type | Nd:YAG | |
| Pulse duration | 30-120 ns | 30-240 ns |
| Cooling type | air | |
| Beam width | 10-100 mm | |
| Optical fiber length | 2-8 m | |
| Power supply | 220 V, 50 Hz | |
| Power consumption | 0,8 kW | 1,2 kW |
| Case dimensions | 750 x 520 x 330 mm | |
| Case weight | 40 kg | |
| Gun dimensions | 190х400х65 mm | |
| Gun weight | 3 kg | |
| Operating life | 100 000 hours | |
| Warranty period | 24 months | |
| Operating mode | 24/7 | |
Technical help
Fill in your details and we will call you back as soon as possible
By leaving a request, you give your consent to the processing of personal data
Equipment advantages
CONTACT-FREE
CLEANING
Without mechanical action that can damage the surface
HIGH PRECISION
PROCESSING
Ability to treat uneven surfaces, hard-to-reach places, and local areas
SAFE AND CLEAN
PROCESSING
No use of chemical reagents. No side contaminants as dust, sand and the like.
COMPACT AND
CONVENIENT
Low weight and a comfortable design, so one person can operate it
OPERATING LIFE MORE
THAN 100,000 HOURS
This is more than 30 years of service, when used for 8 hours 5 days a week
LOW OPERATION
COSTS
Requires no consumables and has low power consumption
EASY
TO USE
Training takes no more than 2 hours and does not require special skills
HIGH
MOBILITY
Complete with built-in batteries allow you to operate it without connection to the mains
Equipment demonstration
See how your components, parts, and other objects will be laser processed
- On test samples in our demo room
- In real conditions at your site
What kind of pollution does it remove
- Scale
- Rust
- Oil products
- Adhesive coatings
- Paint
- Fouling
- Organic impurity
- Metal plating
Do you still have questions?
Fill in your details and we will call you back
as soon as possible
By leaving a request, you give your consent to the processing of personal data
or call us at: +44 (20) 4577 3477