Laser engraving device P-Mark FB
For those who need a large machining field and a flexible setup system. The device moves in XYZ axes. Works with complex large-sized parts.
- Form factor:
- Floor
- Radiation power:
- 10-100 W
- Treatment field:
- 20 х 20 - 1500 х 1500 mm
- Laser source:
- IPG-Photonics pulsed fiber laser
- Beam travel speed:
- up to 15,000 mm/s
- Software resolution:
- 2 μm
- software:
- P-Mark Soft software system
- Control interface:
- USB, Ethernet, Wi-Fi
- Operating system:
- MS Windows, Linux, iOS, Android
- Power supply:
- 220 V, 50 Hz
- Power consumption:
- up to 900 W
- Installation dimensions:
- 900 x 800 x 2100 mm
- Installation weight:
- 200 kg
- Operating life:
- 100 000 hours
- Warranty period:
- 24 months
| Mechanical marking | Electrochemical marking | Laser marking | |
| High-resolution marking | |||
| High performance | |||
| Durability of marking | |||
| No product deformation | |||
| Serial numbering capability | |||
| Adaptability into the process line | |||
| No waste | |||
| Low cost of operation | |||
| Requires no personnel competence | |||
| Low power consumption | |||
| No consumables required |
| Model | P-Mark FB 20 | P-Mark FB 20 | P-Mark FB 50 | P-Mark FB 100 |
| Form factor | floor | |||
| Laser emission power | 20 W | 30 W | 50 W | 100 W |
| Optical treatment field | 120х120, 180х180 mm (optional from 20×20 to 500×500 mm in increments of 20mm) | |||
| Mechanical treatment field | 200х300 to 1000х1500 mm in increments of 50 mm | |||
| Laser source | IPG-Photonics pulsed fiber lasers | |||
| Beam travel speed | up to 15 000 mm/с | |||
| Software resolution | 2 μm | |||
| Pulse repetition rate | 2-200 kHz / 1,6-1000 kHz (for APD modification) | |||
| Pulse energy | 1 mJ | |||
| Wavelength | 1064 nm | |||
| Pulse duration | 100 ns | |||
| Pulse duration for APD modification | 4-200 n | 4-200 ns | 1,5-350 ns | 1-120 ns |
| Cooling type | Air | |||
| Software | P-Mark Soft software | |||
| Creating images | Full-fledged graphic editor | |||
| Control interface | USB, Ethernet, Wi-Fi | |||
| Operating system | MS Windows, Linux, iOS, Android | |||
| Power supply | 220 V, 50 Hz | |||
| Power consumption | up to 900 W | |||
| Dimensions | 900 x 800 x 2100 mm | |||
| Weight | 200 kg | |||
| Operating life | 100 000 hours | |||
| Warranty period | 2 years | |||
Laser engraving and marking with Pokkels P-Mark
A separate direction of Pokkels' development is laser engraving and marking equipment. High speed, easy operation, 3D engraving are only some of the advantages of the P-Mark series. Learn more about the capabilities of laser systems in this article.
Technical help
Fill in your details and we will call you back as soon as possible
By leaving a request, you give your consent to the processing of personal data
Equipment advantages
HIGH
REPEATABILITY
Ability to produce both piece and batch products
INDELIBLE
MARKING
Excellent resistance to external influences engraving
HIGH PRECISION
OF TREATMENT
High resolution eliminates distortion of the applied pattern
USER-FRIENDLY GRAPHIC
EDITOR
Special software allows creation of images of any complexity
OPERATING LIFE MORE THAN
100,000 HOURS
That's over 30 years of service when used for 8 hours 5 days a week
LOW
OPERATION COSTS
Requires no consumables and has a low power consumption
WIDE RANGE
OF SETTINGS
Allows making a drawing of different colors, changing the relief, applying deep 3D engraving
HIGH SPEED
OF OPERATION
The fastest method of marking. Processing speed: up to 15000 mm/s.
Equipment demonstration
See how your components, parts, and other objects will be laser processed
- On test samples in demo room
- In real conditions at your site
Processed materials
- Ferrous metals and alloys
- Titanium
- Brass and copper
- Aluminum
- Nickel
- Coated metals
- Plastics
- Rubber products
- Ceramics
- Stone
- Hard alloys
- Precious metals
Do you have any questions?
Fill in your details and we will call you back as soon as possible
By leaving a request, you give your consent to the processing of personal data
or call us at +36-19-994-636